Mossberg Changing Barrels - 93 Bedienungsanleitung PDF herunterladen

CHANGING

BARRELS

930

AND 935

AUTOLOADING

SHOTGUN

Figure 4

After performing any work on your firearm such as cleaning, disassembly,

or installation of any accessory, check your firearm for proper functioning

before firing any live ammunition.

Firearms are complicated mechanisms. Any modification, alteration, or

improper fitting of parts may result in a dangerous malfunction, damage

to the firearm and injury to the shooter and others. The firearm’s owner

is r

esponsible for the corr

ect reassembly and functioning of the fir

earm

after any disassembly or replacement of parts.

isually and physically inspect the chamber and bor

e of the barr

el to

make certain it is free of any obstructions, excessive oil or grease. If you

are unable to remove any obstruction, bring the firearm to a qualified

gunsmith or send it to a factory authorized Product Service Center.

Obstructions of any kind can result in damage to the firearm and/or serious

personal injury to you or those around you when the firearm is fired.

O.F. MOSSBERG & SONS, INC.

.O. BOX 497 • 7 GRASSO A

VENUE, NOR

TH HA

VEN, CT 06473

PHONE (800) 363-3555

www.mossberg.com

Safety and safe firearms handling is everyone’s responsibility.

UNCTION TESTING

After performing any work on your firearm such as cleaning, disassembly,

or installation of any accessory, check your firearm for proper functioning

before firing any live ammunition.

Be sure the firearm is completely unloaded by visually and physically

checking the chamber, elevator, and magazine tube. Also make certain

the muzzle is pointed in a safe direction at all times.

1. Move the safety button fully rearward to the “ON” (SAFE) position.

2. Grasp the operating handle and pull the bolt fully rearward. It should lock in

the open position.

3. With fingers and other objects clear of the ejection port, press the bolt release

and allow the bolt to move forward under spring pressure. It should lock in the

fully closed position. Repeat this procedure several times to check for free

movement of the action assemblies.

4. With the action closed and the safety button fully rearward in the “ON” (SAFE)

position, pull the trigger fully rearward. The hammer should not fall (NO FIRE).

5. Remove your finger from the trigger. Move the safety button forward to the

“OFF” (FIRE) position. The hammer should not fall (NO FIRE).

6. Leave the safety button forward in the “OFF” (FIRE) position.

7. Pull the trigger rearward. The hammer should fall (FIRE).

8. Open the action. Move the safety button rearward to the “ON” (SAFE)

position.

IF YOUR FIREARM DOES NOT PERFORM AS DESCRIBED IN ANY OF

THE ABOVE STEPS, CONTACT THE FACTORY AUTHORIZED PRODUCT

SERVICE CENTER IMMEDIATELY. DO NOT ATTEMPT TO USE THE

FIREARM.

PART NO. 18973 REV A

66469 12/31/08 8:30 AM Page 1

1 2

CHANGING 1

Inhaltsverzeichnis

Seite 1 - CHANGING

CHANGINGBARRELS930TMAND 935TMAUTOLOADING SHOTGUNFigure 4After performing any work on your firearm such as cleaning, disassembly,or installation of any

Seite 2

DISASSEMBLYMove the safety button fully rearward to the “ON” (SAFE) position andvisually and physically check the chamber, elevator, and magazine tube

Kommentare zu diesen Handbüchern

Keine Kommentare

Mossberg Changing Barrels - 93 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sport und Erholung Mossberg Changing Barrels - 93 herunter. Mossberg Changing Barrels - 93 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sport und Erholung Mossberg Changing Barrels - 93